Price: $32.99 - $29.00
(as of Dec 29, 2024 18:51:52 UTC – Details)
Commercial grade 360° multi-level passive infrared low voltage ceiling mount occupancy sensor with motion detection.
This ceiling sensor motion utilizes passive infrared (PIR) technology allowing it to sense motion up to 1,200 square feet at 360 degrees and can automatically turn lights ON/OFF when it detects motion and ambient light level. This occupancy sensor light ceiling switch is ideal for business use for the purpose of convenience, energy efficiency, security and surveillance. It is a must have in all in businesses, warehouses, manufacturing places, factories, offices, along with any other large spaces. This product has an adjustable time delay controlled via DIP switch ranging from 15 seconds up to 30 minutes, as well as a sensitivity adjustment between 50% and 100%.
Occupancy sensor light ceiling switch wire designation: Hot, Load, Neutral.
Incandescent/Tungsten: 800W @ 120VAC, 50/60Hz
Fluorescent/Ballast: 800VA @ 120VAC / 1200VA @ 277VAC. 50/60Hz
Motor: 1/4 HP, 120 VAC
Operating Temperature: 32°F to 131°F (0°C to +50°C)
Adjustable Time Delay: 15 sec up to 30 min Sensitivity Adjustment: 50% / 100%
Coverage: 360° of view; 1200sq.ft
Passive infrared technology (PIR)
Multi-level, 360° Fresnel lens for superior occupancy detection
Ceiling motion sensor light controls incandescent, CFL, and LED lighting. This ceiling sensor is easy to install cutting both part and labor costs providing you the best value possible. Enerlites MPC-50L is a low voltage ceiling sensor that consumes very little energy.
***This product requires Enerlites MPP-24 low voltage power pack in order to operate.***
Ceiling mounted sensor/ passive infrared sensor detects full 360° degree multi level field of view. Ceiling sensor controls incandescent, CFL, and LED lighting
Low voltage ceiling sensor switch consumes very little energy, providing you an energy efficient solution for the home, office and business without compromising the performance
Passive infrared/ pir motion sensor technology. Ceiling mount sensor features adjustable time delay with dip switch from 5 sec to 30 min. Adjustable sensitivity from 50% – 100%
Low voltage ceiling sensor / occupancy sensor ceiling light features 360 degree view, multi-level coverage up to 1, 200 ft². UL / CUL Listed. Operating temperature (32 – 131°F) California Title 20 and 24 Compliant
Motion detector required ceiling sensor light Accessories: *Enerlites MPP-24 power pack required! *. Great for businesses, commercial and industrial properties
Keith bernam –
Work great
Great product. Very easy to install. Put this in my basement. Now I don’t have to follow my grandkids and turn off all the pull chain lights
Rob Curtis –
Works!
I installed the line-voltage version to control a pair of light fixtures in the garage. It is working well with good range and sensitivity. I tried one of the $15 products that didnât work and ended up replacing it with this one. Just be aware that the case is a bit of an odd shape and it extends into the fixture box. The plastic circular box I used didnât work since it had solid ears that prevented the sensor from seating. I had to get a square fixture box so it would mount flush. Other than that minor issue, it suits the garage light application well.
Ramsarius Hennisuis –
Good, but can be finicky
I’m very pleased with this unit. It’s exactly what I needed for a basement hallway. It senses great, actuates predictably (most of the time) and was almost no trouble installing. The only issues I have with it are as follows:1. The PIR lens doesn’t like to stay in place. It’s very easy to inadvertently make it fall off.2. The relay that actuates the light is pretty loud when it actuates. If my ceiling were taller perhaps the sound wouldn’t be so loud but I would think there would be some way to attenuate the loud “click” it makes, even just a little.3. We had this very strange occurrence where the power was shut off to the motion sensor so the space could be painted and then it wouldn’t turn back on. It really threw our electrician for a loop. It worked perfectly well prior to painting. They masked it off and flipped the power switch to the lights (thus cutting power to the motion sensor) and then when they were done painting, they flipped the wall switch back on and the motion sensor wouldn’t register any motion detected. It acted like it had no power. We ordered a second unit after a few days to see if it was the unit or the wiring but before the replacement arrived it spontaneously started working again without anyone touching it or any part of the circuit. In total it acted dead for about a week or so before it started working again. Very strange.Other than those issues, one of which I’m scared to try to reproduce, the unit works very well and I’m pleased with it.
Nice timer switch. –
Works great, easy to install, great price.
I installed this in my garage for the overhead lights. Works great, was easy to install, and priced very reasonable.Now I won’t leave the garage lights on all night!
M P –
Great solution with limitations.
Functions great, but has its limitations.As other purchasers have mentioned, this line voltage specific unit does not fit into the standard box store 14-18cu round old work boxes. Youâll be required to purchase an extension kit that Enerlites manufactures and is not sold on Amazon.Part: Enerlites MPC-AThe project I had planned to complete in a few hours turned into a month and half long wait due to sourcing the additional part outside of amazon.
KevinD26 –
Easy install, works really well
Used this to replace some screw-in motion detectors in my garage. Ran a few lights off of it so lights would come on when we walk in. Works perfectly for the application. Since wired in a box, need some electrical work, but was easy to do overall. Sensitivity is much better and way more consistent than the screw-in ones I was using.
tony –
Very useful, Gray wires explained
My review is for the âCeiling Sensor for J-Box Installation MPC-50Vâ the one that comes with 2 small grey wires for a momentary switch. I installed mine in my garage which is my work shop and it works flawlessly, it has an internal relay so it can work with any type of load up to its limit (800 watts Incandescent) The gray wires and the Vacancy function (dip switch) is pooooorly explained in the instructions. In most cases the grey wires are not used and the vacancy dip switch is left to disable but if you want to know what do they do here it goes: They should be connected to a momentary normally open switch (Push button like your door bell or your garage door opener) I set my sensor to 10 minutes delay (I call it timer) so lights will go off 10 minutes after the LAST motion is detected. VACANCY DISABLED: The sensor detects motion > lights turns on > new motion reset timer, timer runs out > lights turns off; while lights are on, the momentary switch will turn lights off and on as many times as you want until timer runs out. If you turn the lights off with the momentary switch they will remain off even if new motion is detected (timer ALWAYS resets w/ new motion regardless mode setting ) UNTIL the timer runs out, THEN a new motion will turn lights on. VACANCY ENABLED: The sensor is sensing but lights remain off, the momentary button will turn lights on, ONLY if timer is active that means sensing must happen before, if the lights are on and the timer expire the lights turns off BUT if in the next 30 seconds the sensor sense motion again the lights will tune back on for another timer period, if the timer and the 30 seconds expire you go back to the beginning were sensing will not turn on lights. In short this mode prevent lights from turning on during periods you donât want, lights stays off if manually turned off or timer + 30 sec expires. In my case I have it on Vacancy Disable. I push the momentary switch if I know I will not return for a while so lights do not stay on for the duration of the timer.
Beto Bustos –
This was perfect for what I was looking , same size easy to instal
Saskatchewan Homeowner –
The only light switch for my garage lighting was in the house, an awkward setup with only 2 lamp holders in the garage. I installed this in one of the two electrical ceiling boxes and changed the other to a duplex outlet in conjunction with installing LED shop lighting. With this ceiling occupancy sensor I can open the door to the garage and the lights will be on before I can even step into the garage.As another reviewer said there is a delay before it turns the lights on, this sometimes happens after a month or so but is fixed after the power goes off and on again (restarting the device) so I left the original light switch in place in the “on” position to facilitate restarting the device. I adjusted the duration so that when activated the lights will stay on for about 6 minutes which is perfect for my application.
Hooman –
Had this installed in our walk in closet and so far it works perfectly. It is very convenient to have a sensor like this installed especially for when your hands are full.
semaphore15 –
Had my electrician installed for me. Works well.
Alain Vezina –
Les réglages et la sensibilité à la détection me conviennent parfaitement