Price: $47.99 - $37.94
(as of Jan 01, 2025 16:27:19 UTC – Details)
A wireless PIR Motion Detector from 2GIG Technologies adds an additional layer of security to a home by alerting users when motion is detected. Upon detection the device can be set to alert via an audible chime and/or report detection to the central control panel. When integrated into a 2GIG Go!Control Z-Wave Control Panel, owner’s can remotely view these alerts via a Smartphone, tablet or computer at any time and even receive a text alert when a PIR Motion Detector is triggered (service plan required for remote monitoring and management).
The Passive Infrared (PIR) Motion Detector is wireless and wall-mounted for quick setup with a maximum sensor detection range of up to 30 feet x 50 feet. To prevent false alerts caused by a family pet the PIR Detector is pet immune up to 55 lbs. The device has a wireless RF transmission range up to 350 feet in open air when used with the 2GIG Go!Control Panel and it is tamper protected.
Dual element sensor with 30 ft. by 50 ft. range
33 or 55 lb. pet immune
90-degree look down, 110° spread
Lithium battery with 5 years life
3 different mounting brackets
Todor Lirkov –
Works well
Easy to configure to 2GIG-GC3, works well.
Rick –
Good motion detector.
Works as advertised, easy to install, and immediately connected to my 2-gig panel.
Nello –
Missing jumper blocks.
I ordered two 2gig PIR Motion Detectors, one works but the other is not because itâs missing both the PET & SENS Jumper Blocks. Returning the unit to UPS store.Update: the other one still works as designed.
John –
it’s pretty easy, just a few screenful of questions for …
Works are described. Once you figure out how to add a new sensor, it’s pretty easy, just a few screenful of questions for the configuration.
Diamond Dog –
Easy to install
This unit works 99% of the time. But I have had it false before. Easy to install. I don’t use the pet function because my dog is 120 pounds. I turn the sensor upside down and mount it above the height of my dog and that works
C. Rock –
Worst Item ever
does not detect anything. You can literally stand in front of the thing with a big flag, and the thing will not work. I had to to replace it with a honeywell motion detector. this motion sensor is garbage.
Amazon Customer –
Quick Shipping and Product Just as Advertised !!
Quick Shipping and Product Just as Advertised !!
dw –
Installation was easy with Vivint
If you are going to install this yourself you will need to call tech support to have them unlock the installer portion and they can walk you through the programming. Also, as other reviewers have noted, the sensor sleeps for 3 minutes between signals, you can put the sensor in test mode by holding a magnet to the side. Then it will not sleep and will light up with each detection so you can adjust the sensitivity and angle to meet your needs.
44Knight –
This item is easy to install and upload to the panel. Works extremely well and an ideal addition to the security system.
Paul –
Ajouté dans mon Atelier. Se branche facilement au system 2gig existant.