Price: $15.99 - $14.99
(as of Dec 30, 2024 04:05:33 UTC – Details)
You’re provided:
There are 3 pieces of black PIR motion detection switches matched with embedded PIR probes in each package, which can be put into use for controlling the LED lights and LED strip lights, and the adequate amount can meet your daily use and replacement demands.
Practical gift choice:
With exquisite craftsmanship and attractive appearance, the infrared motion sensor controllers are considered as ideal presents for your friends, family members, neighbors, colleagues, etc., which will gain their affection.
Specifications:
Material: plastic
Main color: black
Size: about 7.5 x 3 x 2 cm/ 2.95 x 1.18 x 0.79 inches
Package includes:
3 x PIR sensors
Notes:
Manual measurement, please allow slight errors on size.
The color may exist slight difference due to different screen displays.
Operating Voltage and Current Rating: the supply voltage of PIR controller is 12 V to 24 V, and the electric current is 6 A; Please confirm the relevant parameters before use to ensure safety
Adjustable Detention Period: the sensing distance of the PIR motion sensor is about 5 m/ 16.4 ft to 8 m/ 26.25 ft, and there is a time setting button at the back of the controller, which can be rotated to set the delay minutes of turning off the switch from 1 to 10 minutes
Operating Principle: the working principle of the PIR sensor, whose sensor sensing angle of view is 120°, that the load switch is controlled by the infrared detecting mode, is simple, and you can install the sensor in the proper environment according to your actual needs
Easy to Install and Use: connect the load cables first and then the power cables, to ensure that there is no short circuit between the cables of the infrared motion light switch before powering on the device, and then set the delay time; When a person is detected, the load light is turned on, and when the person is away for a set number of minutes, the load light automatically goes off
Compact and Lightweight: the waterproof infrared motion detector made of quality plastic measures approx. 7.5 x 3 x 2 cm/ 2.95 x 1.18 x 0.79 inches, and the right size makes it easy to use or store the detector at some places you want with saving space
Kurdparwer –
Not effective at all
I tried them and they did not detect motion. They stay on forever. They do not switch off. Waste of money
Bikeman76 –
Perfect Motion Detector for 12V LED Strip Lights
I found the perfect 12 volt motion detector for use with LED strip lights. This device is super easy to install inside cabinets or anywhere you want an automatic, short duration light. I have 6 of these in various kitchen cabinets and they all turn on flawlessly when the cabinet door is opened. This is a great product at a great price!
Michael M. –
Will not turn lights back off
They don’t work. Lights will come on with this motion sensor but will not turn back off. Tried every which way to make them work but no dice. Not sure if I can return them or not but I’ll be looking for something different
YSHI –
If it doesn’t turn off you might insert wire the wrong way
Reasonable price, I couldn’t find anything else work with pigtails straight forward like this with the price. I did test, haven’t install yet. If you encounter an issue LED won’t turn off, it’s possible that you installed the wires the wrong way like I did. You’ll need to have red wire in + (in the middle), black wire in – (on the outside).Only complain is the screw to adjust the active time is kind of impossible to access, and no material online or in box tell you which position means how long of active time roughly it is. Would be 4.5 even if the seller tried a little bit on explaining it
Richard F. –
Great product
Great product. Fast service .will buy again
D. Alderman –
Just what I needed
I used these to install LED lights in my camper compartments and they work very well. The time adjustment is very nice.
Anonymous user –
Motion detection is closer to 10 feet.
They work but probably closer to 10 feet detection during daytime. Have not checked at night.
ChanMadeGear –
Loud buzz when using dimmer
I added these to a 120v to 24v under cabinet lights. They work but:The first time you turn on, it comes on for a couple seconds, then goes off. Motion is needed to turn on. No too bad though.The real issue is the buzzing when less than 24v is sent through via dimmer switch. Too noticeable. Cannot use. Or use lights at 100%0
Algeciras A. Estambul –
Utilizado en combinación con un sensor de iluminación, está controlando los reflectores de una terraza y funciona tal como se esperaba.
Horus F. –
No son malos pero su calidad no es la mejor y una venia defectuoso pues la salida daba una inyencodad más baja en la luz debido a que el voltaje entregado era menor a los 12v
chu –
Los conecte tal como dice el instructivo y no funciona