Price: $12.99
(as of Dec 30, 2024 22:40:50 UTC – Details)
Sensky 360 Degree Ceiling Mount Occupancy Sensor, 110-240V PIR Motion Sensor Switch, High Sensitive Movement Detector Light Switch, Neutral Required(Max Detection Distance: 6 m)
The ceiling mount occupancy sensor is ideally suited to use on circulation areas, store rooms, toilets, kitchens, common stairs wells or corridors where there are frequently people passing in and out of an area and the lighting often gets left on all day.
Descriptions:
Power Input: 110 -240V/AC
Product Size: 115mm(D)×50mm(H)
Power Frequency: 50Hz/ 60Hz
Working Humidity: ＜93%RH
Working Temperature: -20°C~+40°C
Installation Height: 2.2-4m
Ambient Light: 3-2000Lux (adjustable)
Time-Delay: Min: 10sec±3sec Max: 7min±2min
Power Consumption: 0.45W (working) 0.1W (static)
110V Rated Load: Max.800W (incandescent lamp); Max.200W (energy-saving lamp)
220V Rated Load: Max.1200W (incandescent lamp); Max.300W (energy-saving lamp)
Motion Detecting Speed: 0.6 ~1.5m/s
Detection Distance: 6m max (＜24°C)
Packing Lists:
1 x Sensky Motion Detector Switch
2 x Screws
1 x User Manual
Note: We provide every customer 12 months satisfaction customer service. Please feel free to contact us if you have any issue.
【Light Sensor Adjustable】- The light sensor value of this motion sensor switch is 3-2000Lux. When it adjusted on the “sun” position(max LUX value), can both work at daytime and night; While on the “moon” position(min), it works when ambient light is less than 3Lux.
【Time-Delay Adjustable】- 10sec±3sec ~ 7min±2min, you can set the delay time to your demand. Time-Delay is added continually, when the ceiling mount occupancy sensor receives the second induction signals after the first induction, it will re-calculate time once more.
【Detection Range】- 360 degree detection high-sensitivity ceiling motion sensor switch with 6 meters max detection distance.
【Convenient & Affordable】- Turning on/off the light by movement in your rooms, this motion sensor light switch brings more convenience for you and your family members in daily life, also saves energy for your family.
【Wide Applications】- Working by detecting human motion infrared rays, the ceiling mount occupancy sensor can be used in garage, hallway, basement, stairway, kitchen, cloakroom, loft…Indoor use, please install the occupancy sensor in a spot protected from direct sun and any rain.
Ryan P. –
Very Sensitive
Installed this in a drop ceiling in a 24×24′ room on a 9′ drop ceiling. Works very well with activating on pretty small movements. Only flaw I have is it gets triggered in middle of the night by the heaters coming on. There’s no way to adjust sensitivity to motion, just ambient light and how long its on.
Bruce H –
Works fine – configuration is not exactly US standard but not too much bother to adapt
This is my second purchase of this product – which tells you I think it is worth buying. If you are not at least a little bit handy you might have trouble installing this switch as there are two minor deviations from US standards.First, the color coding of the wiring is not the US standard for switches that are offset from the main line to a lamp (that is, the switch is at the end of a spur off the wire feeding power to the lamp) That standard is to use a 3 wire (plus ground) cable for the spur with Black=Hot, White=neutral, and (typically) Red=return of the hot signal to the main line. In this device the three colors are brown, blue, and red. Please read the included documentation to see how to use these 3 wires (if you can’t do that you should not be installing this yourself).The other oddity is that the screw holes in the base plate (not shown) are not spaced to attached to US standard junction boxes. That was easily fixed by drilling an extra hole in the plastic base plate but again, if you are not at all handy, this could throw you.
Greg Leroy –
A Bargain at Quadruple the Price
I have one high hallway light that I tried two other expensive motion detection sensors. Neither were reliable. This model worked perfectly since installed and has been flawless for nearly six months. I canât recommend this unit highly enough. It seems as though it would have no problem being mounted outside in the elements, but I havenât tried that. Also, I havenât tried large outdoor spaces. What I can tell you is that this detector has been rock solid.
Runnerduck –
Low Quality
Several issues: the mounting plate holes do not match a standard US ceiling box. It comes with an unnecessary terminal connector that requires a tiny flat head screwdriver. The directions are very poorly written and hard to understand. It’s really not that sensitive. I’m finding that you get what you pay for with motion sensors.
ALIRIO J PUCHE –
Worked for two weeks
This thing only worked for two weeks. The light turned off after few minutes as expected, but a second after it turns on and never turn off again. This is inside a closet so no movement inside the closet after doors are closed. I am not returning this because the time to be spent returning it is not worth it, I am just throwing it away.
Me Here –
Perfect generic motion sensor for any light.
Installed in clothing closet, works great. The installation instructions were terrible, but I followed the instructions correction others posted here.Worked perfect and inexpensive.
Amazon Customer –
It works
Sensitivity can be a bit funky but once you figure it out, it works good. Iâm buying another
Chris Perrotti –
Incredible value
These occupancy sensors are an incredible value. They are very reliable, sensitive to motion and really easy to install. I have installed more than a dozen of them in a school facility and have had only positive responses.
Cathy Holmes –
I was concerned that the sensor would be too sensitive — from what others were saying — but it’s not. I use it in the basement where the light switch is all the way across the room, but sometimes I need to put a light on in the room before, just so the sensor can ‘see’ me. Still, I love it and would buy again if I needed to. Highly recommended!
Ahmad Kay Soon Poh –
Received item in good working condition.
Martin –
NEW: After one year, i had to take it off, it was turning on my lights literally every +-20seconds and thats even after i removed everything that has an option to move – my guess is the unit is faulty now and i wont be buying this again.Original:Easy to install, distance when it can trigger is great, but i have it installed outside by my side door and everytime wind blows, my small tree and it’s leaves move and it triggers the sensor and light comes on. So, it is little too sensitive!
Shadreda –
It works the time setting and sensitivity setting works but night and daylight setting doesn’t work so light comes on on broad day light
Neeraj –
Not worth the money, the sensor went bust in just 3 days of use. Last night it switched on with no one walking in the lobby where I have installed.Despite the proximity sensor adjustment it switches on Iin broad Daylight and at night when no one is walking. Not worth the money.I had bought it thinking Amazon would ha e a solid quality control.earnt the hard way it is not. Will go for more branded and expensive product like Schneider ARGUS.