Price: $29.99 - $10.99
(as of Dec 30, 2024 07:29:04 UTC – Details)
Product Description
With a 180° field of view, the Motion Sensor Light Switch pick up the motion of human through a passive infrared sensor, as soon as someone walks in the room and it will automatically turn the light off after a pre-set amount of time. Perfect for porch, closet, garage, hallway, stairs, basement, pantry and laundry room, etc.
Rated Load
1200W/220v (incandescent lamp)
300W/220V (energy-saving lamp)
800W/110V (incandescent lamp)
200W/110V (incandescent lamp)
Power Consumption :
0.45W(work) 0.1W (static)
Detection Motion Speed :0.6~1.5m/s
Size :70mm*115mm*35mm
Specification
Input Voltage :110V/AC-240V/AC
Power Frequency:50/60Hz
Detection Range:180 degree
Detection Distance:9m max(less than 24 Celsius)
Time-Delay
Min:10sec(more or less)
Max:30min
Working temperature:20~40 Celsius
Working Humidity: higher than 93% RH
Widely Application
Motion Sensor Switch automatically turns lights on and off according to the motion detected in the room to save money on your energy bill. The PIR sensor switch has broad compatibility making it a good choice for you to upgrade your home. Perfect for pantry closet, garage, Laundry Room LED lights, never worry bout ON or OFF again.
Note
Time -delay is added continually: When it receives the second induction signal after the first induction, it will compute time once more on the rest of the first time-delay basic (set time). Currently, the temperature becomes lower, the sensitivity of the sensor would become higher, so the probability of false triggering the sensor turning on increases. We recommend reducing the Lux value appropriately to reduce the triggering motion sensors.
TIPS
1. Don’t expose to direct sunlight or lighting, big wind, near a heater or air condition.
2. Don’t fix it at a place where there is obstructing material (e.g. Glass, dense clothes) that IR cannot get through.
3. Don’t fix it in a strong shock or vibration environment.
Is Discontinued By Manufacturer : No
Product Dimensions : 6.3 x 3.15 x 1.97 inches; 3.84 ounces
Item model number : Sensky BS033
Date First Available : June 1, 2014
Manufacturer : Sensky
ASIN : B00KTCTYKQ
【Neutral Wire Required Installation】:Compatible with Three wires (Black, Green and Red). Black wire goes to Hot; Green wire goes to Neutral; Red wire goes to the hot end of your light (the load). Then the other end of the light and the green wire of the switch go to the Neutral. Please also see pictures carefully before you install to avoid causing any false alarm.
【Motion Sensor & Light Sensor Switch】: Automatically turn on/off lights based on room occupancy when detect hear source and environment brightness. Detection motion speed is 0.6~1.5m/s.
【Time Delay】: Adjustable Time-Delay for customizing: Min: 10sec±3sec ; Max:7min±2min (The load will stay on for the time you set, then go out).
【Three Mode and Energy-saving】: AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch.Motion sensor switch uses a passive infrared (PIR) sensor to energy-saving and lower bills.
【Rated Load】: 1200W/220v (incandescent lamp)300W/220V (energy-saving lamp) 400W/110V (incandescent lamp)400W/110V (incandescent lamp)
【Sincerely seller service】: We have 24-hour customer service. If you encounter any problems in use, we are always waiting to serve you.
AirTog –
it works
Installed with LED Garage lights (non dimmable). It simply works and was easy to install. And, it’s engineers had the insight to know that sometimes you want to over-ride the motion detection and just turn on the lights without having to wave your arms when in the middle of doing something where the sensor doesn’t see you. Most other motion detectors don’t have this feature and their “manual” on means that you can turn it on manually, but it will still go off according to the time set. (made the mistake of installing one of those and returned it). This one is truly manual in that you can turn it on manually and it STAYS on! Also works with non-dimmable leds – some of the others say they only work with dimmable LEDS (which doesn’t make sense as motion sensor switches are on/off – no dim controls).
Mr. Methalos –
Deff a great buy
It does so great. I bought 5 more cause they are awesome!!!
grantc1958 –
Not functional
Was never able to get this item to function. Even bench wiring it I was unable to get the indicator light to come on, with no control of the lights. I am experienced with wiring and cannot make this control anything. My suspicion is the switch is defective.
Questorfla –
Suggest mfr review their wiring instructions. They give NO wire to Power. Good luck with that. ::)
Other than the fact that there is No Way you could ever get this to work if wired as directed, they are a great product when correctly connected. They worked better than more expensive items I have tried.or the price, I don’t you will find better. I was VERY Happy with them and immediately ordered more.You WILL need a neutral (no problem for me). With Green to neutral, black to power and white to load the connected lights, even LED bulbs, all worked like a charm. ALL my lighting is LED so can’t comment on incandescent yet.
Patrick Picciano –
Auto light switch
Works much better than the one it replaced. My old switch didnât always sense you in our dark entrance way. This one works great
DSticks –
It’s might be defective. It happens people. ð
I own two, one is in a stairway for upstairs and one is in a stairway for cellar. The upstairs one work fine. There’s a window close by. The cellar has lots darkness with a very small amount of light during the day, it has lots of trouble noticing anything going by it. I’ll go down and up the stairs without it turning on at all. I have both placed were someone’s whole has to walk by them. Its works off and on. Easy to install. The on, off and auto settings are a big help.
Darryl Bolton –
Wall Occupancy sensor
Works as advertised. Highly recommend
Moses Pereira –
Sensitive and fast on turning on
Sensitive and fast on turning on. Love the overwrite feature from Auto, On and Off. With my situation, I the sensor is being covered by shelfs, so it turns off when I am out of its range and used to turn off while I was working. Now with the option to keep it turned on really helps.
Amazon Customer –
great
jim mulley –
did not last long burnt out