$23.99 - $19.19
(as of Nov 27,2022 05:26:20 UTC – Details)
Whether you are hanging pictures, putting up a new set of shelves or getting ready to start an addition, knowing where the studs are in a wall can be extremely handy! And A good stud finder can be the difference between a successful DIY home project and disaster. That is why a stud finder is important.
Tavool 5 in 1 Stud Finder adopt the upgrade sensors with Great Accuracy. This stud finder detector is the best choice for locating the studs/metal/ac wires preciously and quickly!
Tavool stud finder works by detecting density changes in the wall. Our stud finder adopts the UPGRADED SENSORS to get the greatest accuracy. Moreover, this wall scanner can also help you avoid drilling or hammering into water pipes or electrical wires.
Before there were stud finders, people have 2 methods to find the stud : 1. Pounded a small nail into the wall until you hit a stud; 2. Use a small pivoting magnet. However, the first one damages the wall and the second magnet technique is too backward.
Now Tavool Electronic stud finders changed all that. Our electronic stud finders gives you an amazingly accurate view into the wall and show you exactly where each stud is.
Advantages of our TH510 stud finder over the normal stud finders in the market:
2.Identifies the width of stud as well as its location;
3.Easy to read screen and the quick identifiers when you hit a stud;
4.Increases the sensitivity to more than 2 inches;
5.Upgraded model with 5 scanning modes to meet all your different needs.
Our stud finder is perfect for normal scanning of drywalls and finding joists, beams, and studs in almost all types of walls, such as finding studs in the drywall, plaster wall; finding the beams in the ceiling, floor, locating metal behind walls or other surfaces, even locating metal/screws behind tiles.
Give it a try and you will get your homework more easier!
1.This stud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls floors and ceilings but except the cement board wall and brick wall. You can use it on popcorn ceilings, plaster walls, textured surfaces, drywall, etc.
2. Please note: The 9V battery is included in the package but not in the device.
Stud Scan Detection
This stud locator has 3 stud scan modes. Deep Scan scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Scan is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in Stud Scan first.
Metal Scan Detection
Tavool wall scanner will locate metal studs in StudScan/DeepScan/Metal Scan Modes. Since our stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.
After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.
Wire Warning Detection
Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.
Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.
Step 1:Calibrate the tool before every scan
After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.
In stud/deep mode, put it on the wall where you want to detect to calibrate it;In AC/Metal mode, put it in the air to calibrate it.
Step 2: Scan the wall
Move the stud finder along the wall slowly,but note that if shake or lift the scanner accidentally, the device needs to be re-calibrated.
The narrow on the screen together with the beep signal alter, guides you to find the location of the stud.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.
Then choose the Metal Scan to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of “Metal Scan Detection”)Then you can drill it to hang thing
GREAT ACCURACY AND CONSISTENCY -Tavool stud finder is professionally designed and equipped with UPGRADED SENSOR CHIPS. It senses changes in density behind the wall and help locate the stud center and edge with GREAT ACCURACY. Take it home, and make your DIY project easier!
5 SCANNING MODES UP TO 60MM DEPTH – Our stud locator with multi-functions could quickly and easily locate wood studs metal pipes and live AC wires behind walls, floors, and ceilings. This scanner features stud modes with 3 depth types,detecting up to 1.5 inches(38 mm) deep in drywall; Metal mode could detect various metal materials deep up to 2.36 inches; and AC mode detects live AC wires up to 2 inches.
NEVER WORRY DRILLING INTO LIVE WIRES – WireWarning Detection works up to 2 inches(51mm) deep,and would ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes.This would keep you away from AC wires and avoid you from drilling into water pipe or electrical wires. Whether you are a professional, homeowner or a DIY enthusiast, you would find great use with it.
DIGITAL LCD DISPLAY & CLEAR SOUND WARNING – Helps you Find the Exact Stud Center and Edges Easily Quickly – This digital stud detector features large LCD display together with clear sound warning,and could help you find the exact stud center and edges Easily,Quickly and Accurately, saving you more time and effort!
WHY WE RECOMMEND THIS STUD FINDER: Going through years of in-depth research on stud finders, designed with mature product process by professional teams, our stud finder would give you top quality and great accuracy, and provide multi-functions to meet all your practical needs on various wall structures.